Medium and large size DC motor for steel mill, roll, compressor, cement->DC motor

Join

Help

Shanghai Electrical Machinery Group Import & Export Co., Ltd (SEMC)

Home

Company Profile

Products

Video

Inquiry

	Recommended Results

Medium and large size DC motor for steel mill, roll, compressor, cement

Category :

Machinery On-line->Machinery Parts, Accessories & Elements->Engine & Motor->DC motor

Medium and large size DC motor for steel mill, roll, compressor, cement

Product Specification

Model No:

Z4, ZJJ-800, Z

Country	CN
Brand	SEMC
Materials	Steel anc copper
Packing	Plywood box
Minimum Order	1pc
Payment Term	30% in advance, the balance by T/T before shipment or L/C at sight

Product Detail

Series Z4 DC machines are newly developed products of our factory. The products are found wide use for prime mover in various, such as mill auxiliary in metallurgical industry, metal cutting machine-tool, paper making, print, textile, printing and dyeing, cement-making, plasticextruding machine, etc. Outline and mounting dimensions of the motors comply with IEC72 Standard, except
for the axial distance between the mounting holes (dimension B).
Performance and technical requirements of the motors can be checked in accordance with IEC34-1 Standard of the International Electro technical Commission, or DIN57350 Norm of the Deutsche Industries-Norm.
The motors are class F insulated, with reliable insulating construction and impregnating process, ensuring stable dielectric performance and excellent heat dissipation.
The motors possess the features of small size, good performance, light weight, large output, high efficiency and reliability, being able to match the current international advanced level.The motors can be lastingly operated form fully controlled three-phase bridge without a smoothing reactor. Motors for 160V may be operated on single-phase bridge thyristor. In that case, a smoothing reactor, whose inductance is specified in the relevant technical date, should be inserted in the reactor to suppress ripple current.
Features:
1) Technical standards: A) Continuous duty: S1 B) Domestic environmental standard: GB/T 755 (fundamental technical qualifications for motors)
2) Specifications: A) Nominal rated voltage: 160V, 440V (220V, 440V or other voltage available) B) Nominal field voltage: 180V C) Rated speed (nine grades): 200rpm, 300rpm, 400rpm, 500rpm, 600rpm, 750rpm, 1000rpm, 1500rpm, 3000rpm
3) Operating ambients: A) Altitude: Less than or equal to 1, 000m B) Maximum cooling temperature: 40oC C) Free from acidic, alkali fumes or other irritant gas which could corrode insulating materials
4) Compensation windings available for Z4-315, Z4-355, Z4-400 and Z4-450 5) Z4-250 and Z4-280 are also feasible with compensation windings 6) Marked earthing terminals supplied Armature and field circuits for motors may be either operated by static thyristor
controlled supplies or DC generators. Torque can be maintained constant by reducing speed via weakening armature voltage below rated value. We assure that the lowest armature speed range can be decreased to 20rpm by invariable torque and stable running. Meanwhile, field voltage is reduced to weaken speed with a steady
output.
These motors have separate excitations. In addition to the above listed nominal field voltage, other kinds of excitation voltage are also acceptable according tocustomers' requirements.
If voltage is less than 500V, forced excitation is allowed. When a motor is normally operating, the excitation current should be no higher than the rated excitation
current. To keep the insulating materials of the excitation system reliable,
the motor must be protected against self-induced voltage by a resistor connected
in parallel with the field windings when the excitation circuits of the motor
are interrupted.
At rated field voltage, the resistance value of a shunt resistor is about seven times
more than field resistance at low temperature. While the field voltage is higher
than nominal value, the resistance value of a shunt resistor may be lower.


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.